|
Product Details:
|
| Size: | Custom Size,Standard/Nonstandard Size | Material: | NBR |
|---|---|---|---|
| Standard Or Nonstandard: | Hydraulic Pump Or Hydraulic Motors Oil Seals | Product Name: | Hydraulic PU Polyurethane Urethane Oil Wiper Piston Seal |
AP2668 AP2388 AP2864 AP3055 high pressure oil seal TCN 45*68*12 for swing motor seal kit
SEAL KITS---
BOOM CYL SEAL KIT . ARM CYL SEAL KIT . BUCKET CYL SEAL KIT
MAIN PUMP SEAL KIT . HYDRAULIC PUMP SEAL KIT . PIOLVE VALVE SEAL KIT.
GEAR PUMP SEAL KIT VALVE SEAL KIT .PUMP PLUNGE SEAL KIT .
.CONTROL VALVE SEAL KIT. SWING MOTOR SEAL KIT .. TRAVEL MOTOR SEAL KIT .
ADJ CYL SEAL KIT. CENTER JIONT KIT BREAKER SEAL KIT
Oil Seal -- TC TB TCV TCN DB DC DCY TC4Y ISPID BABSL
Piston seal : SPGW SPGO SPG SPGA NCF ODI OSI OUIS OHM OKH DAS , OK SELA OUY D-8
Rod Seal : IDI IUH ISI IUIS D-2 D-3 D-6
U Seal : UPI UPH USH USI V99F V96H UN
Buff Seal : HBTS HBY HBTTS D-14
Wiper Seal : DKB DKBI DKBI3 DKBZ DKI , DWI DKH DWIR DSI LBI LBH VAY DH ME-2 ME-8
Wearing Ring : WR KZT RYT
Rotary Seal : ROI D-14 SPN
Back Up Ring : N4W BRT-PTFE BRT-NYLON BRT2 BRT3 BRT-G BRT-P BRN2 BRN3
O Ring : Oring Kit P series G series AS series S series M 1.5 series M 2.0 series M 1.9series M 2.4 series
M 3.0 series M4.0 series
Piston seal : SPGW SPGO SPG SPGA NCF ODI OSI OUIS OHM OKH DAS , OK SELA OUY D-8
Rod Seal : IDI IUH ISI IUIS D-2 D-3 D-6
Valve Pusher Floating oil seal Bushing hydraulic cylinder seals cylinder seal kits
Test force is 518 26 N (116 6 lb).
Free length after test is 143.4 mm (5.65 inch).
Illustration 2 g03011836
Right side view
Table 2
Specifiion for 242-6277 Engine Oil Lines Gp
Item Qty Part Specifiion Description
5 2 0S-1571 Bolt Use the following bolt tightening sequence in order to tighten the clamp bolts:
Place the clamp assembly so that the clamp assembly is snug against the tube assembly.
Tighten the clamp assembly to the elbow.
Tighten the clamp assembly to the tube assembly.
6 2 0S-1594 Bolt
7 6 109-2332 O-Ring Seal Lightly, lubrie the bore with the fluid that is being sealed.
8 2 6B-9202 Spring Length under test force is 68.3 mm (2.69 inch).
Test force is 84.5 to 99.6 N (19.0 to 22.4 lb).
Free length after test is 112.7 mm (4.44 inch).
9 2 7N-7697 Plunger Valves must start to open at a pressure difference of 130 30 kPa (19 4 psi) .
Valves must be fully open at a pressure difference of 200 30 kPa (29 4 psi).
Contact Person: SUNNY
Tel: 86 18605253464
