Product Details:
|
Material: | PU | Standard Or Nonstandard: | Standard |
---|---|---|---|
Color: | Red,Green | Size: | Avaliable |
Product Name: | NBR Oil Seal For Mechanical Rubber Seal,Hydraulic Seal,Dust Wiper Seals DKB/DKBI/DLI/OUY/UN For Excavator Hydraulic Cylinder | Style: | Hydraulic |
Highlight: | 1672467 Dust Wiper Seals,8C3840 Dust Wiper Seals,Dust Wiper Seals 8C3842 |
1J3540 8C3842 2253283 2782324 1672467 WIPER WHEEL LOADER SEAL parts 1K6982 8C3840 2253281 1672463
Engine Oil Pressure - Typical oil pressure for an engine at rated speed with SAE 10W30 or with SAE 15W40 is 276 to 606 kPa (40 to 88 psi) for the C-15. A higher oil pressure is normal with cold oil when the engine is started. A lower oil pressure is normal at low idle. If the load is stable and the gauge reading changes, perform the following procedure:
Remove the load.
Reduce engine speed to low idle.
Check the oil level. Maintain the oil level at the proper amount.The diagnostic lamp will turn on if the oil pressure drops below 35 kPa (5 psi) at low idle rpm. The diagnostic code will be logged in the Engine Control Module (ECM).
Engine Oil Temperature - This gauge indies the engine oil temperature. An oil temperature that is higher than normal indies a heat problem in the lubriion system and/or the cooling system. This problem can damage the cylinder heads, the cylinder liners, the pistons, and the crankshaft bearings.
Acceptable part number
Fully assembled and complete
No damage due to fire or mishandling
Missing or broken ring gears will result in partial core credit
Core Management
Please refer to the ? Core Management Information System (CMIS 2) Parts Information appliion describing all reman part/CAF and related information. Also refer to other CMIS 2 inquiry appliions such as Customer Profiles, Inspection Reason Codes, Inspection Line Inquiry, Add Charge Information, Entitlement Activity, Entitlement Inquiry, CCR Inquiry, CCR Entry, Shipment Processing; Process Packaging Grief; and Reporting to properly manage core returns and monitor inspection performance. This information will be available to all dealers worldwide after your CMIS 2 conversion date.
Jacket Water Coolant Temperature - Typical temperature range is 87 to 98° C (189 to 208° F). The maximum allowable temperature with the pressurized cooling system is 107° C (225° F) for the C-15. Higher temperatures may occur under certain conditions. The water temperature reading may vary according to load.
Contact Person: SUNNY
Tel: 86 18605253464