Parts Dust Wiper Seals For Backhoe Loader Wheel Tractor Scraper 2259524 2313538 2268202

BACKHOE BH150
BACKHOE LOADER 414E 416B 416C 416D 416E 416F 420D 420E 420F 422E 424D 426C 428C 428D 428E 430D 430E 430F 432D 432E 434E 436C 438C 438D 442D 442E 444E
COMPACT WHEEL LOADER 904B 904H 906 906H 906H2 907H 907H2 908 908H 908H2
INTEGRATED TOOLCARRIER IT24F IT28F IT28G
MINI HYD EXCAVATOR 303 303.5C 303.5D 303.5E 303C CR 303E CR 304C CR 304D CR 304E 305.5D 305.5E 305C CR 305D CR 305E
MOTOR GRADER 120G 120H 120H ES 120H NA 120K 120K 2 120M 120M 2 12G 12H 12H ES 12H NA 12K 12M 12M 2 12M 3 12M 3 AWD 130G 135H 135H NA 140G 140H 140H ES 140H NA 140K 140K 2 140M 140M 2 140M 3 140M 3 AWD 143H 160G 160H 160H ES 160H NA 160K 160M 160M 2 160M 3 160M 3 AWD 163H 163H NA
TELEHANDLER TH210 TH215 TH220B TH330B TH340B TH350B TH355B TH460B TH560B TH580B TH62 TH63 TH82 TH83
TRACK-TYPE TRACTOR D3G D3K XL D3K2 LGP D4G D4K XL D4K2 XL D5G D5K LGP D5K2 XL
WHEEL LOADER 924F 924G 924GZ 924H 924HZ 928G 928H 928HZ 930G

 

 

(1) Filler caps
(2) Sight gauges Check the position of the coolant in the sight gauge (2) for each expansion tank. At normal operating temperature, the proper coolant level is in the upper half of the sight gauge. If the coolant level is low, add the correct amount of coolant.
Loosen filler cap (1) slowly in order to relieve any pressure. Remove the filler cap.
Pour the proper coolant mixture into the tank. Refer to this Operation and Maintenance Manual, "Fluid Recommendations" for information about coolants.

5J0964 SEAL-U-CUP parts 12E, 140B, 14G, 16G, 16H NA, 215, 215B, 227, 235, 245, 245B, 322B L, 322C FM, 325B L, 330B L, 350, 350 L, 375, 375 L, 416, 416B, 416C, 426, 428B, 428C, 438, 438C, 550, 570, 570B, 580, 580B, 5S, 611, 6... SEAL

Clean filler cap (1) and the receptacle. Reinstall the filler cap and inspect the cooling system for leaks. Note: The coolant will expand as the coolant heats up during normal engine operation. The additional volume will be forced into the coolant recovery tank during engine operation. When the engine is stopped and cool, the coolant will return to the engine.Engines That Are Not Equipped with a Coolant Recovery Tank
Pressurized System: Hot coolant can cause serious burns. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure.