|
Product Details:
|
| Color: | Customer Required | Appliion: | Hydraulic Breaker |
|---|---|---|---|
| Type: | Hydraulic Breaker Seal Kit | Style: | Mechanical Seal |
| Size: | Standard Size And Customized Size | Hardness: | 30-90 Shore |
| Highlight: | 9X2641 Seal Kit,8T3590 Seal Kit |
||
8T1392 8T1400 8T1412 8T1488 8T3590 8T3740 9X2641 Seal Kit 9X6393 9X20509J5115 2481187 2502486 2522423 7X2703
8T1392 KIT (SEAL) parts910, 931B
2. Remove "V" clamp (3). Remove cartridge housing (5) from turbine housing (4). 3. Put the cartridge assembly in tool (B) a shown.
When the nut is loosened, do not put a side force on the shaft.
4. Use tool (C), and remove the nut that holds compressor w
Difficulty within the fuel system can be classed in one of two groups: lack of fuel or too much fuel for proper combustion.Many times, the fuel system is blamed when the fault lies elsewhere, expecially when smoky exhaust is the problem. Smoky exhaust can be the result of a faulty fuel injection valve, but it can also be caused by lack of air for complete combustion, overloading at high altitude, excessive oil burning or lack of compression.Troubleshooting The Fuel Supply System
1) in the following step sequence: 1 Make sure the crankshaft is in the most forward postion. Measure dimension (A) from the face of flywheel where the coupling plate fastens to rear face of flywheel housing. 2 Subtract .3195 in. (8.115 mm) from dimension (A). Then subtract the thickness of plates (1).3 Install the number of shims (2) needed to get the measured thickness to the nearest .015 in. (.38 mm). 2. Install a guide bolt (3) in the flywheel for alignment.3. Fasten a hoist to gene
Contact Person: SUNNY
Tel: 86 18605253464
