2332622 2332623 Hydraulic Seal Kit 2959891 2309357 fits Caterpillar 420F2STLRC 430D 430E 430EIT 430EST

2 Fits Caterpillarr 2332623 STABILIZER Cylinder Seal KIT 416D 416E 420D 420E 430E
BSlocator Part Number: 2332623

RAParts 2332622 Swing Cylinder Seal Kit Fits CAT Fits Caterpillar 416D 416E 420D 420E-430E
Reliable Aftermarket Parts Our Name Says It All One New Replacement Fits Caterpillar Backhoe Loader Swing Cylinder Seal Kit That Fits The Following || OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering. || Please Note: Some Listings Use Stock Images for Reference and May Differ from the Actual Product. || This Aftermarket Part Is Made to Meet or Exceed Manufacturer (OEM) Specifications.

BACKHOE LOADERS, 416D, SWING, CYL #: 2283506, SERIAL #: BFP13793-UP; BGJ1141-UP; B2D267-UP
BACKHOE LOADERS, 416E, SWING, CYL #: 2781971, SERIAL #: BWC1-UP; CBD1-5744; SHA1-UP
BACKHOE LOADERS, 420D, SWING, CYL #: 2283506, SERIAL #: BKC921-UP; BLN11085-UP; BMC1064-UP; FDP20481-UP; MBH1-UP
BACKHOE LOADERS, 420E, BACKHOE SWING, CYL #: 2781971, SERIAL #: GAN1-UP; HLS1-UP; KMW1-UP; PHC1-UP; PRA1-UP
BACKHOE LOADERS, 430D, BACKHOE SWING, CYL #: 2283506, SERIAL #: BML5013-UP; BNK6262-UP
BACKHOE LOADERS, 430E, SWING, CYL #: 2781971, SERIAL #: DDT1-UP; EAT1-UP; RLN1-UP; SCD1-UP
BACKHOE LOADERS, 446D, BACKHOE SWING, CYL #: 2514296, SERIAL #: DBL427-UP

(8). Tighten bolts (7) and (8) but do not bend the locks under bolts (8) at this time.6. Use dial indicator (1) to check crankshaft end play (do not use force to hold the crankshaft in position). Remove the generator. Remove only enough shims (4) to get the original amount of end play as shown in Step 2.
PUT BOLTS IN POSITION
9. Bolt. 10. Generator support.7. Install the generator and again check the crankshaft end play. After the correct amount of shims has been installed, bend the locks under bolts (8).8. Install but do not tighten all bolts (9) that fasten generator supports (10) to the base. To align the generator to the

225-8266 Ammeter Tool Gp
The 225-8266 Ammeter Tool Gp is completely portable. This ammeter is a self-contained instrument that measures electrical currents without breaking the circuit and without disturbing the conductor's insulation.The ammeter contains a digital display that is used to monitor current directly within a range between 1 ampere and 1200 amperes. If an optional 6V-6014 Cable is connected between this ammeter and a digital multimeter, current readings can be viewed directly from the display of the multimeter. The multimeter should be used under only one condition:
the readings are less than 1 ampere.A lever opens the ammeter's jaws over a conductor. The conductor's diameter can not be larger than 19 mm (0.75 inch).The spring loaded jaws close around the conductor for measuring the current. A trigger switch controls the ammeter. The trigger switch can be locked into the ON position or into the OFF position.After the trigger has been working and the trigger is turned to the OFF position, the reading appears in the digital display for five seconds. This accurately measures currents in areas with a limited access. For example, these areas include areas that are beyond the operator's sight. For DC operation, an ammeter contains a zero control, and batteries inside the handle supply the power.237-5130 Digital Multimeter Gp or 146-4080 Digital Multimeter Gp