3E4184 8J5816 5J8175 3E4185 3E4142873E4183 3 E4195 3E4215 4T04883E4201 3E4216 1438914 4T6898 3E4186 3E4196 9J1318 5U3644

3E4184 8J5816 5J8175 3E4185 3E4142873E4183 3 E4195 3E4215 4T0488 3E4201 3E4216 1438914 4T6898 3E4186 3E4196 9J1318 5U3644

9J1318 SEAL AS parts 16G, 436, 924H, R1600

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-1114 Vacuum Cap 1
5P-0306 Vacuum Transducer 1
6V-4142 Fitting 1
5K-5068 Fitting 1 Start By:
Remove the muffler.Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.Note: Put identifiion marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Turn the battery disconnect switch to the OFF position.