|
Product Details:
|
| Material: | Pu Nbr Ptfe | Colour: | Black |
|---|
2297173 2297174 2297176 2297188 2297189 2297190 2297191 2297194 2304001 2309357 2310898 2315021 2316844 2316845 2330761
ENGINES
ALL 3500B COMMERCIAL ENGINESProblem:
The 1495-2 "Injector Trim Code Not Programmed" diagnostic code is new to the latest software. ET does not yet recognize this code so this code is displayed as "Unknown Code. Refer to Troubleshooting Guide". Since this feature was added after the last service manual revisions, this code does not appear in the service manuals. This code is active if the injector trim codes have never been programmed into the ET calibration screen. Solution:
Program the injector trim codes. Many engines were built before trim codes were used on the injectors. The injector trim codes in ET should be programmed to "1100" if the injectors do not have trim codes. If the trim codes are already present in ET, reprogram the trim codes to the same value. The 1495-2 diagnostic code should disappear after the programming is complete. This procedure should only have to be performed once.COPYRIGHT 2001 ALL RIGHTS RESERVED
Contact Person: SUNNY
Tel: 13316046929
