1856583 LIFT TIFT STEERING for loader Hydraulic Cylinder Seal
1856583 KIT-SEAL parts 416B, 416C, 416D, 426C, 428B, 428C, 432D, 432E, 434E, 436C, 438C, 442D, 442E, 444E, 902, 906, TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH62, TH63, TH82, TH83 KIT
Alternative (cross code) number:
CA1856583
185-6583
1856583
One New Cylinder Seal Kit Fits , Fits , Universal Products 303CR, 416C, 416D, 420D, 430D, 906, 908, TH62, TH63, TH82, TH83 Models Interchangeable with 1856583, 1856583-A, 2350354,
Stevens Lake Parts Rod: 1-1/2" || Bore: 3" || Replaces Part Number: 2350354 || Some Listings Use Stock Images For Customer Reference, Please Allow For Slight Differences.
Compatible equipment models: 1856583:
BACKHOE LOADER 416B 416C 416D 426C 428B 428C 432D 432E 434E 436C 438C 442D 442E 444E
COMPACT WHEEL LOADER 902 906
TELEHANDLER TH220B TH330B TH340B TH350B TH355B TH460B TH560B TH62 TH63 TH82 TH83
"Test ECM Mode" is a feature on Electronic Technician (ET) that is used to troubleshoot an engine that may have a problem with the Electronic Control Module (ECM). If an appliion supports this feature, ET will allow a new ECM to be used temporarily as a test ECM. If an appliion does not support this feature, refer to Troubleshooting, "ECM - Replace".When the "Test ECM Mode" is activated, an internal timer sets a 24 hour clock. This clock will count down only while the ECM is powered. If the new ECM fixes the problem, the engine can be released while the "Test ECM Mode" is still active. After the ECM has counted down the 24 hour period, the ECM will exit the "Test ECM Mode". The parameters, the accumulated hours, and the engine serial number will be permanently programmed into the new ECM. The new ECM can no longer be used for another engine or for a test ECM.Note: When the"Test ECM Mode" is activated, the "Personality Module Code" is 0. After the ECM has counted down the 24 hour period, the "Personality Module Code" will be dependent on the appliion.If the new ECM does not resolve the problem, and 24 hours has not expired, the ECM can be used as a new ECM. Anytime prior to the 24 hour limit of the "Test ECM Mode", a new engine serial number and new parameters can be reprogrammed.
