2502486 2502485 Seal Kits 2502488 2159989 2159985 2159986 2502485 2502487 2502488 2159987 2159988 2159990

2502486 2502485 Seal Kits 2502488 2159989 2159985 2159986

2159996 2502486 2502485 2502487 2502488 2159987 2159989 2159985 2159986 2159988 2159990 2159995

2502486 KIT-SEAL parts 325B L, 345B L KIT

2159996 KIT-SEAL parts 385C, 385C FS, 5080, 5090B KIT

Kit King - 2502486 Aftermarket Hydraulic Cylinder Seal Kit
Kit King USA 90 mm rod & 130 mm Bore || equipment types: excavators || Compatible equipment models: 325B, 325B L, 325B ln, 345B, 345B L, 345B LC and more || Typical hydraulic appliions: bucket || Fits cylinder models: 1184008, 1184166, 1232044, 1497610, 1505913, 1788449, 2033057, i71345 and more

Part Numbers: 2502486, 2502485, 2502488, 2159989, 2159985, 2159986, 2502485, 2502487, 2502488, 2159987, 2159988, 2159990
Keywords: Hydraulic Cylinder Seal Kit
Compatible with CAT Excavator Loader

Product Description:
The Hydraulic Cylinder Seal Kit is specifically designed for CAT Excavator Loaders and includes a comprehensive set of seals that match the provided part numbers. These seal kits are meticulously engineered to ensure reliable sealing and optimal performance of hydraulic cylinders in CAT equipment. With their high-quality construction and precise fit, these seal kits effectively prevent leaks and maintain the efficiency of hydraulic systems.

Features:

• Premium quality seals for exceptional performance and durability
• Engineered to precisely fit the specified part numbers
• Resistant to wear, pressure, and extreme temperatures
• Ensures leak-free operation and optimal performance of the hydraulic system
• Easy installation and replacement

Applications:
The Hydraulic Cylinder Seal Kit is suitable for various hydraulic cylinders used in CAT Excavator Loaders, including:

• Bucket cylinders
• Boom cylinders
• Arm cylinders
• Lift cylinders
• Tilt cylinders
• Steering cylinders

Compatibility:
These seal kits are specifically designed for CAT Excavator Loaders. Please verify compatibility with your particular machine model.

Packaging:
The Hydraulic Cylinder Seal Kit is carefully packaged to ensure secure handling and transportation. It is typically packaged in a protective container or box to prevent any damage during transit.

2502487 Aftermarket Hydraulic Cylinder Seal Kit by Kit King USA
Kit King USA 85 mm Rod 120 mm Bore || Equipment Type: Excavators || Compatible Equipment Models: 315BL, 317B, 317BL, 318B, 318BL, 320, 320B, 320BL, 320BLN, 320BN, 320BS, 320S, 322, 322B, 322BL, 325, 325B, 325BL, 325BLN, 330B, 330BL, 345B, 345BL, 345BLC, M320 and More || Typical Hydraulic Appliions: Boom, Bucket, Stick || Fits Cylinder Models: 087-5496, 087-5633, 118-4128, 118-4134, 133-6633, 138-6696 and More

HYDRAULIC CYLINDER SEAL KIT PART NUMBER LIST:

System Operation Description:The generator over current warning occurs due one of the following:
The EMCP 3 detects an over-current condition that persists for a duration that is a function of the over-current level.
A condition exceeds a threshold for a programmed durationIf the RMS current of any phase goes above the "Generator Definite Time Over Current (Amp) Percentage Threshold", then the following will occur:
A timer is started
Generator over current event is made activeThe tripping time for generator over current detection is determined from the phase with the highest current and is the smaller of the following two values:
Curve time
Remove cable strap (5) from the cylinder head and front housing (10) .
Remove bolt (7) and nut (6) from the front housing.
Remove bolts (8) and nuts (9) from the front housing.
Remove bolts (11) from the front housing.
Illustration 3 g01078119
Loosen bolts (15) from the engine oil pan.Note: It is not necessary to remove the engine oil pan from the engine.
Remove front housing (10) .
If necessary, remove studs (14) and the O-ring seals from the front housing.
Remove gasket (12) from plate (13) and the front housing.
Determine the conditions that caused the over-current condition.Expected Result:An over-current was caused by an occurrence known to the operator and the operator would like to put the generator set back into service.Results:
OK - The operator can determine the cause for the over-current condition. The condition has been repaired, and the operator wants to put the generator set back into service.Repair: Reset the generator set. Resume normal operation and verify that the problem has been corrected.STOP