7X2726 8T2066 2422550 2456824 Loader Seal Kits Lift Tift Steering

7X2726 8T2066 2422550 2456824 Loader Seal Kits lift tift steering

1 Pc of New Seal KIT 7X2726, Compatible with
One New Replacement Cylinder Seal Kit , Compatible With Excavator Stick Models: 215, 215B, 215C, 215D, 219, 219D || PLEASE NOTE: YOUR SEAL KIT MAY LOOK SLIGHTLY DIFFERENT. || Rod: 3 1/2", Bore: 5 1/2" || Replaces Part Number: 7X2726

One New Cylinder Seal Kit Fits , Fits 966A, 966B, 966C, 966R Models Interchangeable with 7X2669, 7X2669-A, 8T2066, 8T2066-A
Stevens Lake Parts Rod: 2 1/2", Bore: 6" || This Is An Aftermarket Replacement Part Made To Meet Or Exceed OEM Specifiions. || Please Note That OEM Part Numbers, Models, & Dimensions Are Intended For Your Cross-Reference. Feel || Some Listings Use Stock Images For Customer Reference, Please Allow For Slight Differences.

C1.5 GBD00204-00206, 209-210, 213-219
NCA00360, 362, 381, 418, 421, 427
C2.2 GBE00169-00170, 220, 228-229, 231-234, 244-247, 271, 281-282, 287-289, 295-296, 326, 345-346, 362, 370, 376
NCB00385, 393, 479-481, 553, 573-574, 596
PARTS NEEDED2 2 175-5197 Idler Gear As Before assembly bore in the 125-9751 Bushing for the idler gear assembly is
81.060 0.010 mm (3.1913 0.0004 inch).
Installation depth of the 125-9751 Bushing is
1.00 0.25 mm (0.039 0.010 inch).
3 4 8M-2530 Bolt Torque to
140 10 N m (103 7 lb ft).
4 1 101-1366 Gear Shaft Diameter is
74.990 0.010 mm (2.9524 0.0004 inch).
Refer to Disassembly and Assembly for the installation procedure for camshaft gear (5).
6 2 101-1367 Idler Shaft Diameter is
81.000 0.010 mm (3.1890 0.0004 inch).
7 2 9X-8887 Bolt Use the following procedure in order to tighten the bolt for the camshaft drive gears:

Release the pressure in the cooling system by slowly loosening the filler cap on the radiator. Drain the coolant from the radiator and oil from the hydraulic oil cooler.
At operating temperature, the hydraulic oil tank is hot and under pressure. Hot oil can cause burns. To prevent possible personal injury, release the pressure in the hydraulic system before and hydraulic lines or components are disconnected or removed.