5J4991 7J2032 5J5020 5J4987 4T5172 8T8242 9X7269 3E4260 5J7854 4T0529 8T8230 7J2032 9J9872 5J8011

5J4991 7J2032 5J5020 5J4987 4T5172 8T8242 9X7269 3E4260 5J7854 4T0529 8T8230 7J2032 9J9872 5J8011

BACKHOE LOADER 416C 416D 420D 426B 426C 428C 430D 432D 436 436B 436C 438B 438C 438D 442D 446 446B 446D 450E
INTEGRATED TOOLCARRIER IT12
MOTOR GRADER 14G
QUARRY TRUCK 771C 771D
TRACK SKIDDER 527
TRACK-TYPE TRACTOR D4H D4H XL D5H D5H XL D5R LGP D6H D6M D6N D6N LGP
TRUCK 769 769C 769D
WHEEL SKIDDER 528 528B 530B

 

Compatible equipment models: 5J7854:

BACKHOE LOADER 416 416E 416F 422E 426 428E 438
BULLDOZER 5S 6A 6S
FELLER BUNCHER FB518
INTEGRATED TOOLCARRIER IT28 IT28B
MOTOR GRADER 16G
TRACK LOADER 951B 953D
TRACK SKIDDER 517 D4HTSK II D4HTSK III
TRACK-TYPE TRACTOR 30/30 D4H D4H XL D5M D5N D6K LGP D6K2 D6K2 LGP D8N DEUCE
WHEEL LOADER 916 920 930 930R
WHEEL SCRAPER 615 615C
WHEEL SKIDDER 528 528B 530B

 

Compatible equipment models: 4T5172:

EXCAVATOR 215B
LOGGER 227
TRACK SKIDDER D4HTSK III

 

Aftermarket replacement 5J4991 Seal Assy, Hydraulic Piston
Generic P007529, 5J4992, 4J2231, 5J4991, 3J7782, M-5J4991, Seal Assy, Hydraulic Piston, , Seal, Assy, Hydraulic, Piston 5J4991,

 

9X7269 | Seal
HHP provides parts equal or better in quality compared to the OE at a fraction of the cost. || Products are crafted with hard-wearing materials for long-lasting strength and durability. || Parts meet or exceed OEM specifiions to ensure proper fit and function. || Image(s) is for illustration purposes only and may not represent the actual part. || Products are only sourced from quality certified manufacturing facilities.

 

5J7854 - SEAL ASSEM. fits ()
Blumaq 5J7854 - SEAL ASSEM. fits ()

Hydraulic Cylinder Seal

Excavator seal kit

3304 ( 37Y ),
3306 ( 07Y ) Spark-Ignited Engines;
3304 ( 83Z ),
3306 ( 85Z ) Generator Set Engines;
3306 ( 84Z ) Marine EnginesDescription of Change: New cast iron valve rocker arm groups are used in the valve mechanism groups. The former valve rocker arm groups included stamped steel rocker arms. The bearing could become loose in these rocker arms. The new valve rocker arm groups include cast iron rocker arms. The new cast iron rocker arms will provide improved bearing retention.Adaptable To: The new 6I1647 Valve Rocker Arm Group (exhaust) is a direct replacement for the former 7W6115 Valve Rocker Arm Group (exhaust). The new 6I1650 Valve Rocker Arm Group (intake) is a direct replacement for the former 4W9166 Valve Rocker Arm Group (intake). The former valve rocker arm groups are canceled. The new valve rocker arm groups are in effect as follows: 3304 Spark-Ignited Engines...37Y1991-Up3306 Spark-Ignited Engines...07Y3901-Up3304 Generator Set Engines...83Z6895-Up3306 Generator Set Engines...85Z9153-Up3306 Marine Engines...84Z2159-Up

Check the coolant level when the engine is stopped and cool.Engines That Are Equipped with a Coolant Recovery Tank
Illustration 1 g00103638
(1) Filler cap
(2) "COLD FULL" mark
(3) "LOW ADD" mark
Observe the coolant level in the coolant recovery tank. Maintain the coolant level to "COLD FULL" mark (2) on the coolant recovery tank.
Loosen filler cap (1) slowly in order to relieve any pressure. Remove the filler cap.
Pour the proper coolant mixture into the tank. Refer to this Operation and Maintenance Manual, "Refill Capacities and Recommendations" for information about coolants. Do not fill the coolant recovery tank above "COLD FULL" mark (2).
Clean filler cap (1) and the receptacle. Reinstall the filler cap and inspect the cooling system for leaks. Note: The coolant will expand as the coolant heats up during normal engine operation. The additional volume will be forced into the coolant recovery tank during engine operation. When the engine is stopped and cool, the coolant will return to the engine.Engines That Are Not Equipped with a Coolant Recovery Tank
Pressurized System: Hot coolant can cause serious burns. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure.
Remove the cooling system filler cap slowly in order to relieve pressure.
Maintain the coolant level within 13 mm (0.5 inch) of the bottom of the filler pipe. If the engine is equipped with a sight glass, maintain the coolant level to the proper level in the sight glass.
Illustration 2 g00103639
Typical filler cap gaskets
Clean the cooling system filler cap and inspect the condition of the filler cap gaskets. Replace the cooling system filler cap if the filler cap gaskets are damaged. Reinstall the cooling system filler cap.
Inspect the cooling system for leaks.